December 22, 2008

Bath For Pickling and Scale Removal

Bath for pickling and scale removal as follows:
  1. Low Carbon Steel: - 5 to 15% sulfuric acid at 50 to 82 oC. - 25 to 85% (vol) hydrochloric acid to room temperature. - Dry acid salts, 120 g/l at 25 to 60 oC.
  2. High Carbon Steel:- Because of the tendency to smut in acid, mechanical methods of scale removal usually precede short acid dips.
  3. Stainless Steel: - 10 to 20% (vol) nitric acid plus 1 to 2% hydroflouric acid at 50 to 60%.
  4. Copper and copper base Alloy: - 10 to 40% (vol) sulfuric acid at room temperature. - 10 to 15% (vol) sulfuric acid plus 15 to 30 g/l of sodium dichromate at room temperature. - 25% (vol) sulfuric acid plus 12.55% (vol) nitric acid at room temperature.

Post by Aluminum Anodizing.

Other articles:

No comments:

Featured Post

Use Rain Water for Car Battery

 Rain water is very good for your Car Battery because rain water don't contain any mineral on it. Rain water is proceed from natural con...