February 14, 2008

Chemical Composition


Chemical Composition for Polishing Treatment


The table below describe the chemical composition for polishing treatment before aluminum anodizing process be done. This pretreatment will helps on produce more intense colors of dyeing aluminum anodized. The necessary passivization of the aluminum can also be achieved by chemical polishing.





Chemical composition of polishing solution and other conditions
---------------------------------------------------------------------------------------------
Description I II III
---------------------------------------------------------------------------------------------

A. Chemical Composition

(i) Caustic Soda 450 g - -
(ii) Sodium nitrate 300 g - -
(iii) Sodium nitrite 200 g - -
(iv) Trisodium phosphate 90 g - -
(v) Water 450 g - -
(vi) Orthophosporic acid - 500 ml 630 ml (s.g. 1.7)
(vii) Nitric Acid (s.g. 1.4) - 70 ml 150 ml
(viii)Sulfuric Acid (s.g. 1.84) - 250 ml 210 ml
(ix) Acetic Acid glacial - 60 ml -
(x) Nickel Sulfat - 5 g -
(xi) Urea - - 10 g

B. Solution Temperatur 90-100 C 100 C 100 C

C. Immersion time (min) 0.2 - 1 0.51 0.5 - 1 ------------------------------------------------------------------------------------------------

Other articles:

No comments:

Featured Post

Composition of Alloy and Process Limitation

Composition of aluminum alloy make the process condition of anodizing is conditioning in order can get good performance of anodized all...